Avaya G450 Manager, Cli Reference Manual

Page: 621 / 1334

OSPF
Issue 1 January 2008 621
ip ospf message-digest-key
Use the
ip ospf message-digest-key
command to specify the message-digest key for the
interface. This command enables OSPF MD5 authentication. Use the
no
form of the command
to remove an old MD5 key.
Syntax
ip ospf message-digest-key key_id algorithm key
no ip ospf message-digest-key key_id
Parameters
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To specify the message-digest key to be 3 with password mypwd:
G450-001(if:FastEthernet 10/2)# ip ospf message-digest-key 3 md5 mypwd
Related Commands
ip ospf authentication , ip ospf authentication-key , ip ospf cost , ip ospf dead-interval , ip ospf
hello-interval , ip ospf network point-to-multipoint , ip ospf priority , ip ospf router-id , router ospf ,
show ip ospf , show ip ospf database , show ip ospf interface , show ip ospf neighbor , show ip
protocols
Parameter Description Possible
Values Default
Value
key_id
The OSPF key ID 1-255 10
algorithm
The authentication algorithm md5
key
The OSPF password