IP interface configuration
Issue 1 January 2008
475
Syntax
load-interval
seconds
no load-interval
Parameters
User Level
read-write
Context
Interface: Console, Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, USP PPP L2,
USP PPP L2-L3, USP FR L2), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3), VLAN (L2,
L2-L3), Loopback (L2, L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3), USB-modem
Example
To set the load calculation interval to 60 seconds:
G450-001(if:Serial 3/1:1)# load-interval 60
Related Commands
,
,
,
,
show ip interface
Use the
show ip interface
command to display information about an interface that has an
IP address or about all interfaces that have IP addresses.
Syntax
show ip interface [
interface_name
|
ip_interface
|
ip_address
]
Parameter
Description
Possible
Values
Default
Value
seconds
The load calculation interval, in seconds.
This parameter must be divisible by 30.
30-600
300
Summary of Contents for G450 Manager
