Avaya G450 Manager, Cli Reference Manual

Page: 300 / 1334

CLI Commands DHCP server
300 Avaya G450 CLI Reference
client-identifier
Use the
client-identifier
command to configure a reservation/manual pool. A
reservation/manual pool reserves one IP address for a specific client. This command specifies a
unique identifier for the client. The pool for which you configure a client identifier must contain
one IP address only. This means that the start and end IP addresses of the pool must be equal.
The DHCP server uses the client identifier to recognize the DHCP client and allocates the
reserved IP address to the client. Use the
no
form of this command to clear a specified unique
identifier for a DHCP client.
Syntax
[no] client-identifier unique-identifier
Parameters
User Level
read-write
Context
dhcp pool
Example
To set the MAC address as a client identifier for an Ethernet MAC client with MAC address
00:11:22:33:44:55
:
G450-001(DHCP 5)# client-identifier 01:00:11:22:33:44:55
Related Commands
bootfile , default-router , dns-server , domain-name , end-ip-addr , lease , name , next-server ,
option , server-name , show ip dhcp-pool , start-ip-addr , subnet-mask , value ,
vendor-specific-option
Parameter Description Possible Values Default Value
unique-
identifier
A unique identifier for
a DHCP client, in the
format
type
:
data
Hex string, any value.
For Ethernet MAC use
type
:
data
format,
where
type
is 01 and
data
is the MAC address
of the device.
null hex string