Avaya G430, Manual

Page: 447 / 696

Root level
command
Command Description
A maximum of two servers can be added to a
single interface. You must be in an interface
context to use this command
no ip bootp-
dhcp server Removes a server.
ip bootp-dhcp
relay Enable or disable relaying of BOOTP and
DHCP requests to the BOOTP/DHCP server
You must be in general context to use this
command.
no ip bootp-
dhcp relay Disables the relaying of BOOTP and DHCP
requests.
DHCP server
The Branch Gateway supports DHCP server. DHCP server is a protocol for automatically
assigning IP addresses and other configuration parameters to clients on a TCP/IP network.
DHCP server minimizes the maintenance of a network of, among other things, IP telephones
and PCs, by removing the need to assign and maintain IP addresses and other parameters
for each device on the network individually.
Since a DHCP server can be configured on the Branch Gateway, local branch devices are not
dependant on receiving configuration parameters over the WAN from a remote DHCP server
and, therefore, can be assigned IP configuration parameters in case of WAN failure.
The Branch Gateway supports the following DHCP server features:
• Up to 32 DHCP pools
• Up to 256 IP addresses for all DHCP pools together
• Automatic and reservation pools
• Standard DHCP options and IP phone and wireless special options
• Vendor specific information option
• DHCP relay packets
• Global statistics
• Syslog/traps for special events
The Branch Gateway can function as a DHCP server, as a DHCP relay, or both simultaneously,
with each interface configured in either DHCP server mode or DHCP relay mode. For example,
you can configure the Branch Gateway to provide DHCP service to voice devices while DHCP
requests by data devices are routed to a central remote DHCP server using DHCP relay.
The router
Administering Avaya G430 Branch Gateway October 2013 447