Avaya G430, Manual

Page: 373 / 696

Name Description
three round-trip times. An asterisk (*)
indicates that the probe packet timed out.
RTP statistics examples
This section includes an example of configuring the RTP statistics application for a sample
network. In addition, there are some example calls between various types of phones.
Related topics:
Four telephones in a sample network on page 373
A remote call from analog to IP telephone on page 375
A local call between an IP and an analog telephone on page 377
A remote call from IP telephone to IP telephone on page 378
A conference call on page 380
Four telephones in a sample network
The following figure shows the locations of four telephone extensions in an example network.
Telephones with extensions 2004 and 2111 are connected to the local Branch Gateway 1.
Extensions 2002 and 2101 are connected to the remote Branch Gateway 2.
At the site of local Branch Gateway 1 – the administrator enabled and configured the RTP-MIB
application as follows:
//to enable the RTP statistics application:
Gxxx-001(super)# rtp-stat-service
//to view the configuration of the application:
Gxxx-001(super)# show rtp-stat config
RTP Statistic: Enabled
QoS Trap: Disabled
QoS Fault Trap: Disabled
Fault: 0
Clear: 0
QoS Trap Rate Limiter:
Token Interval: 10.00 seconds
Bucket Size: 5
Monitoring applications
Administering Avaya G430 Branch Gateway October 2013 373