manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Installation Manual, Page: 19 / 96

Share
Download
Avaya Ethernet Routing Switch 8300 Installation Manual Download Page 19

Chapter 2:  New in this Release

The following sections detail what's new in 

Avaya Ethernet Routing Switch 8300 Installation — Modules,

NN46200-305

 for Release 4.2:

•

Features

 on page 19

•

Other changes

 on page 19

Features

This document has no feature related changes.

Other changes

See the following sections that are not feature related:

•

Installing a module

 on page 19

•

Customer service

 on page 19

•

NOM statement

 on page 20

•

Document Updates

 on page 20

Installing a module

Added Caution (Risk of equipment damage) to the following procedure in the Module

installation and connection chapter: 

Installing a module

 on page 58.

Customer service

Customer service chapter is added to this document. This chapter describes the complete

range of services and support that Avaya provides to its customers. For more information about

Avaya support, see 

Customer Service

 on page 67.

Installation — Modules

May 2011     19

Summary of Contents for Ethernet Routing Switch 8300

































































































Reviews:

No comments