Installing a C4710 DAP in an external housing
Install a C4710 DAP in an external housing
Installing a C4710 DAP in an external housing
1. Unlock the cabinet, and open the cabinet door.
2. Remove the foam cover and foam blocks from the cabinet.
3. Mount the swivel, and route the incoming cable through the swivel.
4. Verify that the cable fits snugly into the waterproof inlet housing.
5. Connect the incoming cable to the connection box that is delivered with the outdoor
cabinet.
6. Connect the CAT5 cable that is inside the outdoor cabinet to the connector box.
7. Place the foam below the foam blocks.
Install the external housing
228 SIP DECT Fundamentals
October 2012
Summary of Contents for CS 1000
Page 6: ...6 SIP DECT Fundamentals October 2012 ...
Page 146: ...System administration 146 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 174: ...System maintenance 174 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 204: ...Site survey example 204 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...