manualshive.com logo in svg

Avaya CallPilot 202i, Manual, Page: 20 / 92

Share
Download
Avaya CallPilot 202i Manual Download Page 20

To determine if it is safe to remove the 202i server from the switch, see 

Power status LED

indications

 on page 20.

Power status LED functions

The LED indicates two server states:

• The 202i server is in use.

• It is safe to remove the 202i server from the switch.

Power status LED indications

IF the power status LED

is

THEN

On

the server is receiving power from the shelf. It is safe to remove it
from the switch.

 Note:

When the LED is lit, the HEX display may display one of the

following: T:XX, F:XX, HOST, or DOWN.

Off

 Caution:

Risk of equipment damage or data loss

It is not safe to remove the server from the switch. The server

is in one of the following states:

• The server is in the operating system startup sequence.
• The server has completed the startup sequence and is

running.

 Note:

You must courtesy down Avaya CallPilot, and then shut

down the operating system before you can remove the

202i server from the switch. For instructions, see

"Powering down the server" in the Avaya CallPilot

Installation and Configuration Task List. NN44200-306.

Troubleshooting your Avaya CallPilot

®

 system

20     Avaya CallPilot 202i Server Maintenance and Diagnostics

December 2010

Summary of Contents for CallPilot 202i





























































































Reviews:

No comments