Avaya CallPilot 202i, Manual, Page: 18 / 92

LEDs and HEX display on the 202i server faceplate
The LEDs indicate when
• the 202i server is in use
• it is safe to remove the server from the switch
• network activity is occurring
The HEX display displays messages that appear during startup or normal 202i server
operation.
For more information, see Section A: LED and HEX displays on page 18.
Startup sequence and diagnostic codes
To help you determine if the 202i server started successfully (or if it failed), watch the startup
sequence and the diagnostic codes that appear. The entire sequence occurs when you perform
of the following:
• Lock the 202i server against the switch backplane. When locked against the backplane,
the 202i server begins receiving power.
• Restart the operating system.
• Press Reset on the 202i server faceplate to restart the hardware.
For more information, see Section B: Startup diagnostics on page 24.
Section A: LED and HEX displays
In this section
Status LEDs and HEX display location on page 19
Interpreting the power status LED on page 19
Interpreting the network and drive activity LEDs on page 21
Interpreting the HEX display on page 22
Troubleshooting your Avaya CallPilot
®
system
18 Avaya CallPilot 202i Server Maintenance and Diagnostics December 2010