1. Insert the bottom tabs of the front cover plate inside the bottom rail.
2. Align the screw holes on the front cover plate over the screw heads on the Media
Gateway or Media Gateway Expansion.
3. Slide the front cover plate downward to the right, ensuring that the side tabs slide
behind the side rail.
4. Tighten the screws to secure the front cover plate.
5. Continue with "
on page 89," below.
To replace the front bezel
1.
Warning:
Risk of eye injury
Avaya recommends that you operate the Media Gateway and Media Gateway
Expansion with their front bezels installed. When the blue LEDs inside these units
are lit, they are very bright.
To replace the inside front cover plate
Avaya CallPilot
®
201i Server Hardware Installation
December 2010 89