Avaya Cajun P580, User Manual, Page: 78 / 770

2-28 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 2
Web Agent
Procedure
To configure the console serial port as a PPP console from the Web Agent:
1. Select Console from the System > Configuration group on the Web
Agent. The Console Configuration Web page opens ( Figure 2-14 ).
2. Select PPP as the console type and click SELECT. The Console Port
Configuration Web page opens with PPP displayed as the Console
Type (
Figure 2-17 ).
* Note: If you select PPP, the PPP Console Port
Configuration Web page opens.
Figure 2-17. PPP Console Configuration Web Page
3. Select a baud rate from the Baud Rate field pull-down menu that is
different from the one already selected.
4. Select an option from the Flow Control field pull-down menu. The
options are: None and Xon/Xoff.
* Note: You can only change the baud rate and flow control
parameters after you configure the serial port as a PPP
console.
5. Enter the modem initialization command in the Modem Init Cmd field.
The default modem configuration init command is AT&D0SO=1.