Avaya Cajun P580, User Manual, Page: 579 / 770

Document No. 650-100-700, Issue 1 20-15
Managing Intelligent Multicasting
5. Click DELETE to remove your selected multicast session client port, or
CANCEL to restore previous settings.
* Note: Static (Mgmt) client ports can only be removed through the
Static Sessions dialog box.
CLI Command
To delete a multicast session client port using the CLI, enter the following
command from Configure mode:
(configure)# clear intelligent-multicast client-
port <session-id> port <mod-port-spec>
Creating a Static Multicast Session
You can create a static multicast session using either the Web Agent or the
CLI.
Web Agent
Procedure
To create a new static multicast session using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast group on the
Web Agent window. The Static Multicast Sessions dialog box opens
(
Figure 20-7 ).
* Note: You must enable intelligent multicasting on a global
basis to make your static multicast session active. See
“
Configuring Global Intelligent Multicasting ” earlier
in this chapter.
Figure 20-7. Static Multicast Session Dialog Box
2. Select Create to create a new session. The Static Multicast Session
Configuration dialog box opens ( Figure 20-8 ).