Avaya Cajun P580, User Manual, Page: 551 / 770

Document No. 650-100-700, Issue 1 19-21
Configuring AppleTalk Routing
—
DELETE to remove the selected zone filter.
—
CANCEL to restore previous settings.
—
Edit If to add or delete this zone filter to/from an interface. The
Add/Delete Interface to Zone Filter dialog box opens. See
“
Adding or Deleting Interfaces to a Zone Filter ” later in this
chapter for more information.
CLI Command
To edit an AppleTalk zone filter using the CLI, use the following command:
(configure)# appletalk access-list <access-list-
number> <permit | deny> zone <string>
Adding or Deleting Interfaces to a Zone Filter
You can add or delete interfaces to a zone filter using either the Web Agent
or the CLI.
Web Agent
Procedure
To add or delete interfaces to a zone filter using the Web Agent:
1. Select Zone Filter from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk Zone Filter dialog
box opens (
Figure 19-17 ).
2. Select Edit If. The Add/Delete Interface to Zone Filter dialog box
opens ( Figure 19-19 ).
Figure 19-19. Add/Delete Interface to Zone Filter Dialog Box
3. Select the interface to be added from the Add field pull-down menu.
Or