Avaya Cajun P580, User Manual, Page: 523 / 770

Document No. 650-100-700, Issue 1 18-7
Configuring the IPX SAP Protocol
f. Select Enable from the Filter/Suppress pull-down menu.
g. Enter 0 in the Hops field. This ensures that there is no override in
the transmission of data on the network.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
* Note: This filter ensures that all advertising of any known print server
on Interface Remote will be suppressed.
CLI Command
To create IPX SAP name filters using the CLI, enter the following
command from Configure mode:
(configure)# ipx sap-name-filter <precedence>
<filter-name> <service-type> {outbound | inbound |
both} {filter | allow} [<filter-hops>]
Creating IPX SAP Network Filters
You can create IPX SAP network filters using wither the Web Agent or the
CLI.
Web Agent
Procedure
To create IPX SAP Network filters using the Web Agent:
1. Select Net Filters from the Routing > IPX > SAP group on the Web
Agent window. The IPX SAP Net Filters dialog box opens ( Figure 18-
4 ).Only the CREATE button is displayed when no IPX SAP Network
Filers are configured.
Figure 18-4. IPX SAP Net Filters Dialog Box
2. Select CREATE. The Add IPX SAP Net Filter dialog box opens
( Figure 18-5 ).