Avaya Cajun P580, User Manual, Page: 494 / 770

16-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 16
Modifying IPX Static Routes
You can modify IPX static routes form either the Web Agent or the CLI.
Web Agent
Procedure
To modify an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX > Configuration group
on the Web Agent window. The IPX Static Routes dialog box opens
(see
Figure 16-7 ).
2. Select the checkbox for the IPX static route that you want to modify
from the Select column.
3. See Table 16-4 to modify the IPX Static Route configuration.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
CLI Command
To modify an IPX static route using the CLI, enter the following command
Interface mode:
(config-if:<if-name>)# ipx route <network address
| range> <options>
Creating IPX Static Services
You can create IPX static services using either the Web Agent or the CLI.
Web Agent
Procedure
To create IPX static services using the Web Agent:
1. Select Static Services from the Routing > IPX > Configuration group
on the Web Agent window. The IPX Static Services dialog box opens
(see
Figure 16-9 ).
Figure 16-9. IPX static Services Dialog Box
2. Select CREATE to create a new static service. The Add IPX Static
Service dialog box opens (see Figure 16-10 ).