Avaya Cajun P580, User Manual, Page: 493 / 770

Document No. 650-100-700, Issue 1 16-11
Configuring IPX Routing
5. Click APPLY to save your changes, or CANCEL to restore previous
settings.
6. To view or modify IPX Static Routes, select Static Routes from Routing
> IPX > Configuration group on the Web Agent window. The IPX Static
Routes dialog box opens (
Figure 16-8 )
* Note: It is also possible to create a static route by, making a
RIP source route from the IPX Static Route Table.
Figure 16-8. IPX Static Routes Dialog Box
CLI Command
To create IPX static routes using the CLI, enter the following command in
Interface mode:
(config-if:<if-name>)#: ipx route <network
address | range> <options>
Deleting IPX Static Routes
You can delete an IPX static route using either the Web Agent or the CLI.
Web Agent
Procedure
To delete an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX > Configuration group
on the Web Agent window. The IPX Static Routes dialog box opens
(see
Figure 16-8 ).
2. Select the checkbox for the IPX static route that you want to delete from
the Select column.
3. Click DELETE to remove the IPX static route, or CANCEL to restore
the IPX static route.
CLI Command
To delete an IPX static route using the CLI, enter the following command
from Configure mode:
(configure)# clear ipx route {<network>
default|*}