Avaya Cajun P580, User Manual, Page: 442 / 770

14-4 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 14
2. See Table 14-2 to modify the RIP interfaces dialog box parameters:
Table 14-2. RIP Interface Dialog Box Parameters
Parameter Allows you to...
Select Select the RIP interface to be modified.
Interface Displays an interface from a list of interfaces that you
previously configured.
Network
Address Displays an IP address to be associated with the displayed
interface.
Mode Specify the RIP State. Different states include:
• talk only (only send RIP information on this interface)
• listen only (only receive RIP information on this
interface)
• talk/listen (both send and receive RIP information on
this interface)
Talk/Listen is the default setting.
Send Version Specify the version of RIP you want to use to send packets
across this interface. Selections include:
• V1
• V2
• V1/V2
V1 is the default setting
Receive Version Specify the version of RIP you want to use to receive
packets. Selections include:
• V1
• V2
• V1/V2
V1 is the default setting
Split Horizon Specify that IP routes learned from an immediate neighbor
are not advertised back to the neighbor from which the
routes were learned.Selections include:
• Split Horizon - Routes that leave this interface, will
not be advertised back on the same interface.
• Split Horizon with Poison Reverse - Routes that
leave this interface, will be advertised back on the
same interface with an infinite metric (16). Split
Horizon with Poison Reverse is the default setting.
Default Metric Specify the RIP route metric value. Costing metric used
when advertising the RIP route on this interface.
1 is the default setting. The parameter range is 0-15.
1 of 2