Avaya Cajun P580, User Manual, Page: 403 / 770

Document No. 650-100-700, Issue 1 12-87
Configuring IP Routing
Figure 12-41. ICMP Router Discovery Protocol Dialog Box
2. Select the interface on which to enable IRDP in the Select column. A
checkmark displays.
3. See Table 12-33 to configure the ICMP Router Discovery Protocol
dialog box parameters.
Table 12-33. ICMP Router Discovery Protocol Dialog Box Fields
Parameter Allows You to...
Select Select the interface to be configured.
Interface View the IRDP interface name.
Network Address View the network IP address of the IRDP interface.
IRDP State Select Enable IRDP on the selected interface. The default
value is Disable.
Preferences Enter the preference of the address as a default router
address, relative to other router addresses on the same
subnet. The minimum value (80000000 hex) is a signed
32-bit value used to indicate that the address should not be
used by neighboring hosts as a default router address, even
though it may be advertised. The default value is 0.
Adv. Address Select an IP destination address used for multicast router
advertisements sent from the interface.
Options include:
• Multicast - Used on any link where listening hosts
support IP multicast. The default value is 224.0.0.1.
• Broadcast - Used on any link where listening hosts
support IP unicast. The default value is
255.255.255.255.
1 of 2