Avaya Cajun P580, User Manual, Page: 374 / 770

12-58 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 12
Web Agent
Procedure
To display the multicast group table using the Web Agent:
1. Select Group Membership Table from the Routing > IGMP group on
the Web Agent window. The IGMP Group Membership Table dialog
box opens.
Figure 12-27. IGMP Group Membership Table Dialog Box
2. To modify the IGMP Group Membership Table, perform one of the
following steps:
—
Select the entry and click Delete Entry to delete one or more
entries.
—
Click Flush Table to clear the entire table.
—
Click REFRESH to receive the most up-to-date information on
the entries in the table.
3. See Table 12-17 for an definition of the IGMP Group Membership
Table dialog box parameters:
Table 12-17. IGMP Group Membership Table Dialog Box Fields
Parameter Defines the...
Group Member
Interface Interface that is connected to a member of an
IGMP group.
Group Address Group address that has members on this interface.
Group Created On Time at which the group was created on the router.
Group Multicast
Protocol Routing protocol being used for the group. If no
routing protocol is being used on the interface a
group is on, this column displays IGMP.
1 of 2