Avaya Cajun P580, User Manual, Page: 147 / 770

Document No. 650-100-700, Issue 1 5-13
Configuring SNMP
Table 5-5 provides an explanation of the command keywords and variables.
Viewing Configured Views
To view the currently configured views, use the following CLI command:
#
show snmp view [<viewname>]
Deleting a View
To delete a view or remove an OID from a view, use the following CLI
command:
(configure)#
no snmp-server view <viewname> [<OIDST>]
Configuring Groups
Creating or Modifying a Group
To create or modify a group, use the following CLI command:
(configure)#
snmp-server group <groupname> {noAuth | auth |
priv} [read <readview>] [write <writeview>] [notify <notifyview>]
Table 5-6 provides an explanation of the command keywords and variables.
Table 5-5. snmp-server view Command
Parameter Definition
<viewname> The name of the view that you want to create or
modify. The view name can range from 1 to 32
alphanumeric characters.
<OIDST> The object identifier (OID) for the object that you want
to either include or exclude from the view.
You must enter the numeric OID. Use the wildcard
character * to specify a sub-tree family.
{included | excluded} Specifies whether the object is included or excluded
from the view.