Avaya Cajun P580, User Manual, Page: 140 / 770

5-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 5
CAUTION:
Predefined Groups
When you install v6.0 application software, the following predefined groups
are created:
■
normalRO—Provides read-only access to the normal view.
■
normalRW—Provides read-write access to the normal view.
■
adminRO—Provides read-only access to the admin view.
■
adminRW—Provides read-write access to the admin view.
■
initial—Provides read-only access to the restricted view. The
predefined user initial is assigned to this group.
■
internet—Provides read-write access to the internet view, which is
created for administrative SNMPv3 users.
The internet group is accessible only by SNMPv3. You cannot use
CLI commands to access the group.
Do not assign the internet group to a community string. The group
requires both authentication and encryption, which community
strings do not support.
■
noAccess—Provides only notify access to the internet view. Assign
community strings or users to this group when you want them to
receive trap messages, but not have read or write access.
Avaya recommends that you not modify these predefined groups.
When you install v6.0, the existing community strings are assigned to
these predefined groups. If you modify them, the community strings
may lose their access to the switch. For more information on the
migration of existing community strings, see “
Migration of Existing
Community Strings .”
None of the predefined groups, except the internet group, require
authentication or encryption. Thus these groups are accessible by SNMPv1,
v2, or v3. The internet group, however, requires both authentication and
encryption and is accessible only by SNMPv3.