Avaya Cajun P580, User Manual, Page: 106 / 770

3-14 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 3
2. See Table 3-3 and review the Power System dialog box parameters:
* Note: The Total System Power field displays 1400 Watts if three
power supplies are installed. The switch uses power from only
two of the three power supplies. The third power supply is a
redundant power supply and is used only if one of the other
power supplies fails.
CLI Command
To display your switch’s power system statistics using the CLI, enter the
following command from the User mode:
> show system power
Displaying Cooling System Statistics
You can display the statistics for your switch’s cooling system from either
the Web Agent or CLI.
Web Agent
Procedure
To display your switch’s cooling system statistics using the Web Agent:
1. Select Cooling System from the System > Configuration group on the
Web Agent window. The Cooling System dialog box opens with the
status of your switch’s cooling system (see
Figure 3-9 for the P580
switch, or Figure 3-10 for the P882 switch).
Table 3-3. Power System Dialog Box Parameters
Parameter Definition
Power Supply Identifies the power supply
Status indicates whether the power supply is detected.
Type Describes the type of power supply detected.
Total System Power Displays the total system power in Watts.
Current Power Available Displays the current power available.