background image

 

RAB; Reviewed: 
SPOC 7/12/2011 

Solution & Interoperability Test Lab Application Notes 

©2011 Avaya Inc. All Rights Reserved. 

11 of 34 

FaxFinder_SM61 

 

Step 

Description 

4.

 

 

Administer IP Network Region 1 – Continued 

On 

Page 4

, codec sets are defined for inter-region calls. In the case of the compliance test 

at Site A, calls from IP network Source Region 1 to IP network region 2 (

dst rgn 2

) used 

codec set 1. The default values were used for all other fields. At Site B, only one IP 
network region was used, so no inter-region settings were required. 
 

 

 

5.

 

 

Administer IP Network Region 2 

At Site A, IP network region 2 was created for Port Network 2 in a similar manner as IP 
network region 1 shown in 

Step 3

 but with a different name. This was the network region 

used for SIP Trunk connections to Session Manager.  
 

 

 

6.

 

 

Administer IP Network Region 2 – Continued 

The inter-region codec setting was created similarly to 

Step 4

 

 

 

display ip-network-region 2                                     Page   3 of  19 
 
 Source Region: 2     Inter Network Region Connection Management     I       M 
                                                                     G  A    e 
 dst codec direct   WAN-BW-limits   Video      Intervening      Dyn  A  G    a 
 rgn  set   WAN  Units    Total Norm  Prio Shr Regions          CAC  R  L    s 
 

1    1

     y    NoLimit                                             n all 

 2    1                                                                all 
 3    3     y    NoLimit                                             n all 

display ip-network-region 2                                     Page   1 of  20 
                               IP NETWORK REGION 
  

Region: 2 

Location:         Authoritative Domain: avaya.com 
    

Name: PN2 

MEDIA PARAMETERS                

Intra-region IP-IP Direct Audio: yes 

      Codec Set: 1              Inter-region IP-IP Direct Audio: yes 

   UDP Port Min: 2048                      IP Audio Hairpinning? n 
   UDP Port Max: 3329 
DIFFSERV/TOS PARAMETERS 
 Call Control PHB Value: 46 
        Audio PHB Value: 46 
        Video PHB Value: 26 
802.1P/Q PARAMETERS 
 Call Control 802.1p Priority: 6 
        Audio 802.1p Priority: 6 
        Video 802.1p Priority: 5      AUDIO RESOURCE RESERVATION PARAMETERS 
H.323 IP ENDPOINTS                                       RSVP Enabled? n 
  H.323 Link Bounce Recovery? y 
 Idle Traffic Interval (sec): 20 
   Keep-Alive Interval (sec): 5 
            Keep-Alive Count: 5 

 

display ip-network-region 1                                     Page   4 of  20 
 
 Source Region: 1     Inter Network Region Connection Management     I       M 
                                                                     G  A    t 
 dst codec direct   WAN-BW-limits   Video      Intervening      Dyn  A  G    c 
 rgn  set   WAN  Units    Total Norm  Prio Shr Regions          CAC  R  L    e 
 1    1                                                                all 
 

2    1     y    NoLimit                                             n       t 

 3 
 4 
 5 
 6 
 7 
 8 
 9 
 10 
 11 
 12 
 13 
 14 
 15 
 

 

Summary of Contents for Aura Communication Manager



































Reviews: