ArgentWAN3 Hardware Reference Manual
10
Revision 4
PORT CONNECTIONS
This section provides information on the use of the ArgentWAN3 ports. It covers:
y
LAN Port.
y
DTE Port.
y
DC Power Input Connector.
y
Connection to an X.21, V.35 or V.24/V.28 Leased Line.
LAN P
ORT
Connection to the LAN from the ArgentWAN3 is made via the 10BaseT port on the front
of the unit. This port is labelled as follows:
LAN
The ArgentWAN3 10BaseT LAN port is a MDI type port and can be connected to a hub
without the need for a crossover cable. If the ArgentWAN3 is located in the same cabinet
as the ArgentOffice it can be connected to one of the hub ports on the ArgentOffice via a
LAN Interconnect cable (Sales Feature ARG-HSIC, Part No.: CABETHNN01M0PP00).
DTE P
ORT
The DTE port is presented as a standard 25 way D-Type socket on the rear of the unit.
This port is used as a diagnostic aid. This port is labelled:
DTE
DC P
OWER
I
NPUT
C
ONNECTOR
The Argent range of products use a Plug Top PSU module to provide DC power.
The Plug Top PSU is plugged into a suitable mains power outlet and provides a 12V
unregulated DC output. This unregulated DC is fed into the unit via the DC Input port.
This port is labelled:
