Related links
Administering the Signaling Group screen
on page 15
Configuring IP node names and addresses
About this task
If you do not configure IP node names, System Manager ignores the IP interfaces, which can
result in unsuccessful IP synchronization of Communication Manager.
Perform the following procedure for each Survivable Core server, Survivable Remote server, and
adjunct.
Procedure
1. At the command prompt, type
change node-names ip
. Press
Enter
.
2. In the
Name
field on the IP Node Names screen, type node names.
3. In the
IP Address
field, type the IP address.
4. Press
Enter
to save the changes.
Administering the IP Network Region screen
Procedure
1. At the command prompt, type
change ip-network-region xxx
, where
xxx
is the
number of the network region. Press
Enter
.
2. In the
Authoritative Domain
field, select
SIP
.
3. In the
Allow SIP URI Conversion
field, select
y
.
4. In the
Intra-region IP-IP Direct Audio
field, select
y
.
5. Administer the Real-time Transport Control Protocol (RTCP) monitor server parameters.
6. Press
Enter
to save the changes.
Administering Communication Manager
June 2019
Using 96X1 SIP agent deskphones with Call Center Elite
14
