manualshive.com logo in svg

Avaya 4800 Series, Installing

Share
Download
Avaya 4800 Series Installing Download Page 20

Model and connector

Product number

Description
NOTE

: After December 31, 2008 the

Ethernet Routing Switch 4000 also
supports the DDI-capable SFP, part
number AA1419048-E6. The DDI-
capable version is compatible with
AA1419013-E5. The 1000Base-SX
non-DDI SFP order code is still
supported, but it is discontinued and
no longer available for purchase.

1000BASE-SX (MT-RJ)

AA1419014-E5

850 nm, up to 275 or 550 m

The 1000Base-SX non-DDI SFP order
code is still supported, but it is
discontinued and is no longer
available for purchase.

1000BASE-LX (LC)

AA1419015-E5

1310 nm, up to 10 km

Note:

After December 31, 2008 the Ethernet
Routing Switch 4000 also supports the
DDI-capable SFP, part number
AA1419049-E6. The DDI-capable
version is compatible with
AA1419015-E5. The 1000Base-LX
non-DDI SFP order code is still
supported, but is discontinued and is
no longer available for purchase.

1000BASE-XD CWDM (LC)

AA1419025-E5 to
AA1419032-E5

1470 nm to 1610 nm, up to 40 km

The 1000Base-XD non-DDI CWDM
(40 km) SFP order codes are still
supported, but are discontinued and
no longer available for purchase.

1000BASE-ZX CWDM (LC)

AA1419033-E5 to
AA1419040-E5

1470 nm to 1610 nm, up to 70 km

The 1000Base-ZX non-DDI CWDM
(70 km) SFP order codes are still
supported, but are discontinued and
no longer available for purchase.

1000BASE-T (RJ-45)

AA1419043-E5

CAT5 UTP, up to 100 m.

Supports 1 Gbps.

Note:

Supports 1 Gbps and 100 Mbps
in the following units:

• ERS 4826GTS

Table continues…

Small form factor pluggable transceivers

August 2016

Installing Transceivers and Optical Components on Avaya ERS 4800 Series

20

Comments on this document? [email protected]

Summary of Contents for 4800 Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands