manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 61

Calling

Avaya 374x DECT Telephones - User Guide

02/2016     

61

Note:

Note:

You can also accept the second call by pressing the 

Off-Hook

 key.

Switch between Calls

Prerequisite,

 

a new call has been started during conversation, see 

 Starting a new call during a 

call

 on page 59.

1. Press "More" during the call.

2. Select "Switch".

3. Press "Select" to switch to the other call. The first call is on hold.

If needed, repeat the steps above to switch between the calls.

Answer Call Waiting

NOTE: 

Depending on system setup and configuration, this feature might be handled in one of two 

different ways:

Method 1

During an ongoing conversation and a short tone for another incoming call appears, do as 
follows:

1. Press the soft key "More" during the call.

2. Select "Answer Call waiting".

3. Press "Select". The new call is now connected, and the first call is on hold.

When the line is free, the call on hold is automatically dialled again. This is a system dependent 
feature.

Method 2

If a second caller calls during a phone call, the handset beeps and displays the text "Internal 
call" for internal callers and "External call" for external callers. The handset also shows the 
name or phone number of the second caller. To answer the second caller:

1. Press the soft key "Accept".

2. The text "Switch" briefly appears on screen, and the handset transfers to the second call. 

The first call is put on hold.

3. When finished speaking with the first caller, select the "More" soft key.

4. Select "End Call".

5. The second call is closed and the first call is retrieved.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands