manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 59

Calling

Avaya 374x DECT Telephones - User Guide

02/2016     

59

Note:

Note:

Audio transfer

 is visible if Bluetooth connection is active.

Starting a new call during a call

1. Press "More" during the call.

2. Select "New Call". 

3. Press "Select".

Note: 

Enter the number and press 

, or "Call".

Toggling between calls

You have started a new call during a call, and the first call is on hold.

1. Press Soft key 

R

.

The telephone toggles between the calls.

Note:

Note:

You can also switch between the call via Soft key 

More > Switch

. 

Ending a call

You have started a new call during a call, and the first call is on hold.

1. Press the 

On-Hook

 key.

This action ends the current call. The held call rings again as priority call.

Note:

Note:

You can also end the call via the Soft key 

More

 > 

End Call

.

You can end a call by putting the telephone in a charger according to the 

In 

Charger

 > 

Call behavior

 > 

End call

 setting. Note that all ongoing calls will be 

disconnected. See 

Installation and Administration Manual, DECT R4

.

Call back

When a call is made to a busy handset, an automatically call back can be made when the busy 
handset is free. When a busy tone sounds, do as follows: 

1. Press "More".

2. Select "Call back"

3. Press "Select".

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands