manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 31

Descriptions

Avaya 374x DECT Telephones - User Guide

02/2016     

31

Battery

The battery is a rechargeable Li-Ion

 

battery, placed under a battery cover. See 

 Replace the 

Battery

 on page 124.

The battery is fully charged within four hours. See 

 Charge the Battery

 on page 123.

The non-EX classified battery can be charged separately with a battery pack charger. See 

 Charge Spare Batteries

 on page 123.

IMPORTANT:

 When charging the EX classified handset, it is only permitted to use a charger 

marked with DC3-CAAB/rev. 1A (or higher rev.), DC4-CAAB/rev. 3A (or higher rev.) or 
CR3-CAAC on the label. It is not permitted to charge the EX battery pack by itself.

Chargers

Desktop charger

Figure 2: Desktop chargers

You can use one of the two desktop chargers available, one Basic charger that will only charge 
the cordless telephone, and one Advanced Charger with advanced functionality to download 
new software and synchronize parameters. The cordless telephone is fully operational while 
placed in the charger.

The Basic Charger is delivered with a plug-in power supply and is connected into an ordinary 
wall socket. The Advanced Charger is delivered with a power supply adapter. The adapter is 
connected with a power cord to the wall socket and the Charger itself is supplied from the 
adapter.

!

Important:

Important:

For 3749 telephones, battery charging or replacement is NOT permitted in a 
hazardous area.

004

Advanced

Basic

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands