manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 123

Maintenance

Avaya 374x DECT Telephones - User Guide

02/2016     

123

Maintenance

Maintenance of Batteries

Battery Warnings

During a call, only the corresponding battery warning signal will notify the user. The warning 
signal cannot be silenced during a call. When not in call, the warning signal can be silenced by 
pressing  

or 

. 

Charge the Battery

Place the handset in the desktop charger or in the rack charger. The battery is being charged 
when the LED on the handset is steady orange. When the battery is fully charged the LED is 
green.

An animated battery icon 

/

 is also shown in the display indicating charging by starting with 

its current charge and ending with the full charge. A filled battery icon 

/

 indicates a fully 

charged battery. 

NOTE: 

Only use the prescribed chargers for charging. 

Charge Spare Batteries

Spare batteries can be charged with a separate battery pack charger. It can charge six batteries 
at the same time.

The "Low battery" icon is displayed when the battery has 10% or less 
remaining capacity left. In addition; a warning signal sounds every 
minute, the LED flashing orange, and the dialog window "Battery low. 
Charge now." appears.

The "Empty battery" icon is flashing when the battery has 5% or less 
remaining capacity left. In addition; a warning signal sounds every 
second, the LED flashing red, and the dialog window "Battery empty. 
Shutting down." appears.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands