Avaya 374 DECT Series Page 93 Manual Download

Page: 93 / 133

Call answering settings

The default setting for the handset is to use

for answering a call. However, you can configure the

call answering behavior to answer a call automatically, that is, without pressing a key, and/or in
loudspeaker mode.

Note:

When Bluetooth is enabled, the loudspeaker audio volume is lowered due to current limitations
in the intrinsically safe handset.

The answering behavior can also be set to any key. If the

Any key

option is selected, any key

except

, and can be used to answer a call.

Related links

Setting the call answering key

on page 93

Setting the call answering behavior

on page 93

Setting the call answering key

Procedure

1. Press

Menu

2. Select

Settings

3. Select

Answering

Answering key

4. Select one of the following:

•

Hook-off

•

Any key

5. Press

Back

to save the settings.

Related links

Call answering settings

on page 93

Setting the call answering behavior

Procedure

1. Press

Menu

2. Select

Settings

3. Select

Answering

Answer behavior

4. Select any of the following:

•

Automatically

•

Loudspeaking

Settings

July 2017

Using Avaya 374x DECT handsets connected to Avaya Aura

™

Communication

Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 374 DECT Series






































































































































Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands

Avaya 374 DECT Series, Manual

Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands