Avaya 374 DECT Series Page 61 Manual Download

Page: 61 / 133

5. Press

More

, and then do the following as required:

• To delete an entry: Select the entry to delete, and then press

Delete

Yes

• To delete all entries: Press

Delete all

Viewing missed calls

About this task

By default, a missed call is indicated by the Missed call window and the icon. In PDM/AIWS2,

you can also set a time delay if you want the handset to consider a call as missed after a certain

time.

You must configure these features in the handset through PDM or Device Manager.

When you receive a missed call, you can immediately view it by pressing

Yes

. If you press

, use

this procedure to view the missed call.

Note:

If supported by the system, the number’s contact name is displayed in the missed call list.

Procedure

1. Press

Menu

2. Select

Calls

Missed calls

3. Step with and to select number in the list.

Next steps

To call back, select the missed call number from the call list, and then press

Call

Tip:

Press

More

to view the time and date of the call, edit the received number, add to contacts, and

delete the received number.

Viewing call time

About this task

In call time, the total time of the previous call and the last call is displayed.

Procedure

1. Press

Menu

2. Select

Calls

Call time

Calls

July 2017

Using Avaya 374x DECT handsets connected to Avaya Aura

™

Communication

Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 374 DECT Series






































































































































Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands

Avaya 374 DECT Series, Manual

Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands