Configure H.323 video endpoints on Communication Manager 6.0
AVTS R 6.0 Quick Setup
For feedback, use [email protected]
August 2010
24
4
Use the
add signaling-group
command to add a signaling group for the
gatekeeper. Set the following parameters:
●
Group Type:
H.323
●
IP video:
y
●
Priority video. If you want all incoming calls to receive priority video
transmissions, select
y
●
Near-end Listen Port:
1719
●
LRQ Required:
y
●
Far-end Node Name to the name you entered for the gatekeeper in Step 3.
●
Far-end Listen Port:
1719
●
Far-end Network Region to the IP network region you specified in Step 2.
●
Direct IP-IP Audio Connections:
y
●
IP Audio Hairpinning:
y
5
Use the add trunk-group command to add a trunk group for the gatekeeper. Set the
following parameters:
●
Group Type:
ISDN
●
Carrier Medium:
IP
●
Add members to this trunk group
6
Use the
change signaling-group n
command (where n is the signaling group
you added in Step 4) to set Trunk Group for Channel Selection to the trunk group you
added in Step 5.
7
Create a route pattern to the gatekeeper.
8
Configure the gatekeeper.
Table 11: Administering Polycom PathNavigator/ CMA Gatekeepers