Avatar Technologies RH141, User Manual

Page: 6 / 16

6
Operation
Various operations are available from this unit, select your preferred operation as follows:
1. Push buttons.
2. Display mode menu.
3. Keyboard.
4. IR remote control.
5. RS-232 control.
1. Parts and push buttons
Front panel
1 2 3 4 5 6 7 8 9 10
No. Item Description
1 LED indicators Indicate the status of display.
2 INPUT Choose the desired source from 1~4, and then press the corresponding button.
For more details, refer to the chapter of Mode descriptions.
3 Recall Recall the customized setting configured from SET button. Press to light up the
buttons ( 1 ~ 4 ), and then select the desired setting to recall.
4
SET*
Save the customized input and output up to 4 settings.
1. Select a desired mode by pressing PIP / WINDOWS / PAP / QUADVIEW button.
2. Set a preferred input source( 1 ~ 4 ) .
3. Press
SET
button, then all the buttons of input(
1
~
4
) will be flashed.
4. Press a preferred button( 1 ~ 4 ) to save the setting to the memory of unit.
5 FULL/PIP /
WINDOWS / PAP /
QUADVIEW
Select the desired mode you wish to display, and the pressed button will be
illuminated.
6 Exit /
Lock
■ Press to exit the OSD menu.
■
Press to lock all the buttons on the unit, or press it again to unlock
■
Press and hold this button, then turn on the power of switch to restore the
default resolution (1024x768).
7 Menu /
Select
■ Press to bring up the OSD menu.
■
Select a desired option on the menu.
■
Press and hold this button, then turn on the power of switch to restore the
system to factory default settings.
8
(
Cursor buttons
)
Press to navigate the OSD menu.
9 IR receiver Receive the signals from bundled remote control.
10 Pin hole Use a paperclip to reset this unit if necessary.