3
Charging the case
Please charge the case if you see its left-side LED (LED 1) flashing
RED
. Charging the case will also charge the
earphones if the earphones are inside the case.
Please use a DC 5V / 0.5-2A USB wall charger /car charger / computer USB port with the included Micro-USB
cable to charge.
The left-side LED (LED 1) will illuminate
RED
while charging. When fully charged, the left-side LED (LED 1) will
turn off and the right-side LED (LED 2) will illuminate
GREEN
.
DC 5V / 0.5-2A
OR
Basic operations
Function
Operation
Power On
Open the case lid, LED light will illuminate
WHITE
for about 1s.
Power Off
Put the earphones back into the charging case and close the case lid; they will
power off and start charging. LED light will illuminate
RED
and then turn off.
Pairing
Once powered on, the 2 earphones will connect with each other. The
R
earphone
will enter pairing mode with its LED flashing WHITE and
RED
alternately.
Play / Pause
Double tap the touch area on either earphone.
Volume Up
Slide up on the touch area on the
L
earphone.
Volume Down
Slide down on the touch area on the
L
earphone.
Previous Track
Slide up on the touch area on the
R
earphone.
Next Track
Slide down on the touch area on the
R
earphone.
Answer / End a Call
Double tap the touch area on either earphone.
LED Indications
For earphones
Connected with mobile device
LED on the R earphone double-flashes
WHITE
every 5s.
Not connected with mobile device
LED on the R earphone flashes
WHITE
once every 1s.
