Add a 2nd pair of headphones
• Powering up the transmitter, then turn on the HT3189 headphones and transmitter - they will
connect automatically. Now, turn off the headphone.
• Enter the transmitter into PAIRING MODE manually - Press and hold the MFB button for 5 seconds
until the LED flashes
RED
and
BLUE
.
• Place your 2nd set of headphones into Bluetooth PAIRING MODE (please refer to your 2nd head
phones’ user manual).
• Keep the devices close to each other and wait. Once connected, LED on transmitter and headphones
will slow down at the same time.
• Now turn back on the first headphone, it should auto reconnect to the transmitter.
For Next Use,
the 2nd headphones will also auto reconnect to the transmitter once turn on. If not, you
will need to turn off and on both transmitter and 2nd headphones again, or click once on 2nd head-
phones.
Headphone charging
Please charge the headphones if you hear the “low battery” voice prompt. You can charge using a
phone charger (5V/500mA-2A output), PC USB port, TV USB port or any other USB outlet using the
included USB cable. It takes about 3.5 hours to fully charge the headphones. The LED will turn
RED
during charging and turn off once charging is complete.
Troubleshooting
https://support.avantree.com/hc/en-us/sections/115000928623-HT3189-BTHT-3189-BLK-
9
