2
Status of LED Indicator
Bluetooth
Pairing
Flash
BLUE
&
RED
quickly
Connected via aptX-HD
Triple-flash
BLUE
every 5 seconds
Connected via aptX-Low Latency / FastStream
Solid
BLUE
Connected via aptX
Flash
BLUE
2 times every 5 seconds
Connected via SBC
Flash
BLUE
1 time every 5 seconds
Disconnected
Flash
BLUE
1 time every 10 seconds
Battery
Low battery
Flash
RED
Charging
Solid
RED
Charging complete
Solid
BLUE
Connect to a Bluetooth device
1. Enter the AS70 into PAIRING MODE –Slide
to
to turn on the AS70, then slide the switch to the
position and hold it there for 2 seconds. The LED indicator will start flashing
BLUE
&
RED
alternately.If you have
a device plugged into it, you’ll hear“pairing.”
2.
On your device
- Activate Bluetooth,search & select “Avantree AS70” to connect. If you are using a Bluetooth
transmitter, enter your transmitter into Bluetooth PAIRING Mode.
3. Once connected, the LED indicator will either flash
BLUE
or become
SOLID BLUE
(see chart above.) If you
have a device plugged into it, you’ll hear “connected.”
Connect to two Bluetooth devices simultaneously
1. Connect the AS70 to the FIRST device as shown above.
2. Enter the AS70 into
PAIRING MODE
again and repeat steps 2 & 3 above to connect to the SECOND device.
Note
: This feature only works for two mobile devices, such as cellphones and tablets. It doesn’t work for PCs or
Bluetooth transmitters.
Reconnect to Bluetooth device
Once powered on, the AS70 should automatically reconnect to the most recently connected device within 5-10
seconds. If it doesn’t, please either slide the power on/off/pair switch to the
position ONCE or select “Avantree
AS70” from your device’s Bluetooth menu to connect manually. (If you’re using a Bluetooth transmitter, please
refer its user manual.)
