background image

 

 

 
 

IMPORTANT SAFEGUIDES 

 

                              Before the appliance is used, it must be properly positioned and installed as  

described in this manual , so read the m anual carefully. To reduce the risk of fire,  
electrical shock or injury when using the  appliance, follow basic precaution,   
including the following: 

 
 
 
 
 
 

?

 

Plug into a grounded 3 -prong outlet, do  not remove grounding prong, do  not use an ad apter, and 
do not use an extension cord. 

?

 

Replace all panels before operating . 

?

 

It is recommended that a separate circuit, serving only your appliance  be provided. Use 
receptacles that cannot be turned off by a switch or pull chain. 

?

 

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or 
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of 
this or any other appliance. The fumes can create a fire hazard or explosion. 

?

 

Before proceeding with cleaning and maintenance operations, make sure the power line of the 
unit is disconnected. 

?

 

Do not connect or disconnect the electric plug when your hands are wet. 

?

 

Unplug  the appliance  or disconnect power before cleaning or servicing. Failure to do so can result 
in electrical shock or death. 

?

 

Do not attempt to repair or replace any part of your  appliance unless it is specifically 
recommended in this material. All other servicing should be referred to a qualified technician. 

 
 
 
 
 

?

 

Use two or more people to move and install appliance . Failure to do so can result in back or other 
injury.  

?

 

To ensure proper ventilation for your appliance, the front of the unit must be completely 
unobstructed. Choose a well -ventilated area with temperatures above 55

0

F (13

0

C) and below 

90

0

F (32 

0

C). This unit must be installed in an area protected from the element, such as wind, rain, 

water spray or drips. 

?

 

The  appliance should not be located next to ovens, grills or other sources of high heat. 

?

 

The  appliance must be installed with all electrical, water and drain connections in accordance with 
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in 
accordance with the National Electrical Code and local codes and ordinances is required. 

?

 

Do not kink or pinch the power supply cord of appliance. 

?

 

The  fuse (or circuit breaker) size should be 15 amperes. 

?

 

It is important for the appliance to be leveled in order to work properly. You may need to make 
several adjustments to level it. 

?

 

All installation must be in  accordance with local plumbing code requirements. 

?

 

Make certain that the pipes are not pinched or kinked or damaged during installations . 

?

 

Check for leaks after connection. 

?

 

Never allow children to operate, play with or crawl inside the refrigerator. 

?

 

Although the unit has been tested at the factory, due to long-term transit and storage, the first 
batch of cubes must be discarded. 

 

?

 

Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may 
damage or discolor the interior. 

?

 

Do not use this apparatus for other than its intended purpose. 

 

Summary of Contents for WC8302DZD


















Reviews: