background image

 

19 

 
 

 
 
 

 

 
 

 
 
 
 
 
 
 
 

 

YOUR AVANTI PRODUCTS WARRANTY 

Staple your sales receipt here. Proof of 
original purchase date is needed to obtain 
service under warranty. 

?

 

Incidental or consequential damages.  

?

 

Service calls to: 

?

 

Correct the installation of your washer. 

?

 

Instruction on how to use your washer. 

?

 

Replace house fuses or incorrect house 
wiring or plumbing. 

?

 

Repairs performed by unauthorized 
servicers. 

?

 

Repairs when your washer is used in other 
than normal, single-family household use. 

?

 

Service calls that are related to external 
problems, such as abuse, misuse, 
inadequate electrical power, accidents, fire, 
floods, or acts of God. 

?

 

Failure of the prod uct if it is used for other 
than its intended purpose. 

?

 

Pickup and delivery.   

?

 

Repairs caused by unauthorized 
modifications made to the appliance.  

?

 

This warranty does not apply outside the 
Continental U.S.A. 

 

WHAT IS COVERED 
 

LIMITED ONE-YEAR 
WARRANTY 

For one year from the date of purchase by 
the original owner, Avanti Products will, at 
its option, repair or replace any part of the 
appliance that proves to be defective in 
material or workmanship under normal 
use. During this period Avanti Products 
will provide all parts and labor necessary 
to correct such defects free of charge, so 
long as the appliance has been installed 
and operated in accordance with the 
written instructions in this manual. In 
rental or commercial use, the warranty 
period is 90 days. 

 

 

LIMITED 5 YEAR WARRANTY ON PLASTIC TUB 

After one year and until five years from date of 
purchase, Avanti will furnish a replacement plastic 
tub, for one which is defective in material or 
workmanship.  You will be responsible for labor. 
 

LIMITED 7 YEAR WARRANTY ON STAINLESS 
STEEL TUB 

 
After one year  and until seven years from date of 
purchase, Avanti will furnish a replacement stainless 
steel tub, for one which is defective in material or 
workmanship.  You will be responsible for labor. 
 
 

WHAT IS NOT COVERED

 

Summary of Contents for W892F

































Reviews: