Avanti SHP2403B, Instruction Manual

Page: 8 / 16

8

Electrical Connection
This refrigerator should be properly grounded for your safety. The power cord of this refrigerator is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
This refrigerator require a standard 115/120 Volt A.C./60Hz electrical outlet with three-prong ground.
Applicable AC adapter / plug has been provided.
The cord should be secured behind the refrigerator and not left exposed or dangling to prevent
accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and pull straight
out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance.

Reversing the Door Swing of Your Refrigerator
This refrigerator has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call customer service for reversal instructions.
OPERATING YOUR REFRIGERATOR

Temperature Control

Setting the Temperature Control
•
Your refrigerator has only one control for regulating the temperature. The temperature control
is located on the rear of the unit.
•
To control the internal temperature, adjust the control knob according to the ambient
temperature or purpose of use.
•
The first time you turn the unit on, set the temperature control to “5”.
•
The range of the temperature control is from position "0” to “5”.
•
After 24 hours, adjust the temperature control to the setting that best suites your needs. The
setting of “3” should be appropriate for home or office refrigerator use.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.