Avanti FF1010D0W, Instruction Manual

Page: 9 / 32

9
OPERATING YOUR APPLIANCE
Ø
Temperature Control Panels
Refrigerator Temperature Control
Ø
Setting the Temperature Control
•
Your refrigerator has one control for regulating the
temperature. The temperature control is located at
the back of the refrigerator compartment.
•
To change the temperature setting, simply press the
control button and the LED light indicator will cycle
from Coldest to Cold one step with each press of the
button.
•
The first time you turn the unit on, adjust the
temperature control to “
COLDER ” and run for at least
4 hours before placing foods inside. This will ensure
the freezer cabinet is thoroughly chilled and the
refrigerator compartment will be stabilized before
food is placed. Then return selector to
“MID”
position
•
Adjust the temperature control to the setting that best suits your needs. The setting of “MID”
should be appropriate for home or office refrigerator use.
NOTE:
•
IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR
WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE
110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER
TEMPERATURES INSIDE THE REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º
SET THE FREEZER TEMPERATURE CONTROL TO THE “COLDEST” SETTING.
THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER
THESE CONDITIONS.