8
INSTALLING THE METAL HANDLE
This wine chiller includes a stainless steel handle that is not required to operate this unit. To install the
handle please follow the below instructions:
1. Pull away the door gasket in the area where the handle is to be installed on the left side as
shown below in Illustration # 1. The gasket is easily displaced by hand, no tools are
necessary.
2. Align the handle with the screws already installed in the door frame for your convenience.
Tighten the screws using a Phillips head screwdriver until the handle sets both flush and
secured tightly against the door frame. (DO NOT overtighten as this will cause damage to the
handle assembly).
3. Replace the door gasket to its original position.
1
Gasket
2
Phillips Head Screw
3
Phillips Head Screw Driver
4
S/S Handle
