25
A
B
Fig. 5.4
REPLACING THE OVEN LIGHT
(fig. 5.4)
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
– Let the oven cavity and the heating elements cool down;
– Switch off the electrical supply;
– Remove the protective cover (fig. 5.4);
– Unscrew and replace the bulb with a new one suitable for high temperatures (300°C)
having the following specifications: 120V, 60 Hz, 25W, E14
– Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee
REMOVING THE OVEN DOOR
The oven door can easily be removed as follows:
– Open the door to the full extent (fig. 5.5a).
– Open the lever “A” completely on the left and right hinges (fig. 5.5b).
– Hold the door as shown in fig. 5.5.
– Gently close the door (fig. 5.5) until left and right hinge levers “A” are hooked to part
“B” of the door (fig. 5.5b)
– Withdraw the hinge hooks from their location following arrow “C” (fig. 5.5d).
– Rest the door on a soft surface.
– To replace the door, repeat the above steps in reverse order.
Fig. 5.5
Fig. 5.5a
B
A
Fig. 5.5b
C
Fig. 5.5d
Fig. 5.5c
Summary of Contents for DE 2402 SC
Page 28: ......
Page 56: ...Cod 1102477 2 rif 1657 U 3...
