Avanti COR51Z3SGN, Instruction Manual

Page: 10 / 43

10
OPERATING YOUR REFRIGERATOR
ON/OFF POWER
To turn the appliance ON / OFF, touch the POWER button or mark and hold for 5 seconds.
SETTING THE TEMPERATURE CONTROL
•
You can set the temperature as you desire by pressing the SET button and then touching the UP
or DOWN mark. When you touch the two marks for the first time, the LED readout will show the
original temperature set at previous time
。
•
The temperature that you desire to set will increase 1ºF or 1ºC if you touch the UP mark once, on
the contrary the temperature will decrease 1ºF or 1ºC if you touch the DOWN mark once.
•
The temperature inside the unit will be appeared in the display window.
NOTE:
•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the appliance will not start.
•
When you use the appliance for the first time or restart the appliance after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the appliance is running for a few hours everything will be back to normal.
INTERIOR LIGHT
Model: OR51Z3SSN
When you open the door, the light will turn ON automatically. When you close the door, the light will
turn OFF automatically. There is also a light switch located on the control panel which will allow you
to turn the light on/off while the door is open.
Model: COR51Z3SGN
Press the light switch located on the control panel to turn the light on/off.
ºC / ºF DISPLAY
To change the way the temperature is displayed in the control panel from ºF to ºC, simply press the
power button marked and the SET button simultaneously. The control panel display will flash
the new setting and then will show the current temperature of the cabinet.
Door Ajar Alarm (Model OR51Z3SSN ONLY)
If the door has been left open for more than 60 seconds, an alarm will sound and continue to sound
until any of the buttons on the control panel is pressed or the door is closed.
Temperature Alarm
If at any time the inner temperature of the unit raises above safe levels, an alarm will sound prompting
the user to check for the reason for the temperature issue.
Temperatures higher than 86ºF/30ºC or lower than 5ºF/-15ºC will activate the alarm.
Possible reasons could be: Warm fresh food / drinks were placed in the unit. Too much warm
ambient air has entered the unit when the door has been left open for too long. Power Failure for a
long time. The appliance is having technical issues and should be evaluated by an authorized tech.