16
sure the control is
.
To prevent damage use correct cookware, start cooking on the highest temperature and turn control
down to continue cooking.
Never leave an empty utensil, or one which has boiled dry, on a hot surface unit. The utensil could
overheat and damage the utensils or surface unit.
Always be sure that all of the indicator lights are
when you are not cooking.
¾
CLEANING YOUR HOTPLATE
•
Disconnect the A/C from the main power box or designated circuit breaker, turn off the hotplate,
make sure the surface unit is off and cool before proceeding.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
•
Do not use steel wool or steel brush on the cook-top.
NOTE:
Do not immerse hotplate in water or any other liquids.
CARE AND MAINTENANCE – COMPACT KITCHEN
¾
Cleaning Your Compact Kitchen
•
Disconnect the A/C from the main power box or designated circuit breaker, turn off the Compact
Kitchen, make sure all surface units are off and cool before removing anything, then remove all
items including shelves and rack.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelves and rack with a mild detergent solution.
•
The outside of the Compact Kitchen should be cleaned with mild detergent and warm water.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
•
Do not use steel wool or steel brush on the cook-top.
CAUTION
FAILURE
TO
DISCONNECT
THE
APPLIANCE
COULD
RESULT
IN
ELECTRICAL
SHOCK
OR
PERSONAL
INJURY.
¾
Cleaning Burners And Reflector Bowls (CK30-1 / CK30B / CK30B-1)
•
Disconnect the A/C from the main power box or designated circuit breaker and turn off the
Compact Kitchen to make sure that burners are off and cool before removing burners and
reflector bowls.
•
Removing the burners and reflector bowls as following:
•
Lift the edge of the burners opposite from the receptacle and pull them gently out of the
mounting receptacles.
•
After the burners have been removed, the reflector bowls can be lifted out of their mountings.
•
Clean the burners and reflector bowls with mild detergent and warm water. Wring excess water
out of the sponge or cloth when cleaning them.
•
Replace the burners and reflector bowls as following:
•
Line up the opening of the reflector bowls with the burners receptacle, hold the burners as
level as possible with the terminals just positioned into the receptacle, then push the burners’
terminals into the receptacles.
•
When the terminals are pushed into the receptacles as far as it will go, push down the edge of
burners opposite the receptacle.
NOTE:
Do not immerse burners in water or any other liquids.
Summary of Contents for CK30-1
Page 30: ...30 This page left blank intentionally...
Page 32: ...32 PRINTED IN CHINA...
