6.CARE AND MAINTENANCE
DEFROST
The ice build-up on the inner back wall during compressor operation will be automatically defrosted in a
compressor off cycle.
When defrosting is in process, only the circulation fans for both zones run.
Defrost water will drain into the drip dish(on the compressor) .and the water will be evaporated by the
compressor
CLEANING YOUR APPLIANCE
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
Unplug the unit from the wall outlet.
Remove
all
contents.
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
The outside of the appliance should be cleaned with mild detergent and warm water.
Dry the interior and exterior with a soft cloth.
Dust or anything else blocking the vent may hinder the cooling efficiency of the appliance. Vacuum the vent
if necessary.
VACATION TIME
Unplug the unit from the wall outlet.
Remove all the contents.
Clean the appliance.
Leave the door open slightly to avoid possible formation of condensation, mold, or odors.
Short vacations
: Leave the appliance operating during vacations of less than three weeks.
Long vacations
: If the appliance will not be used for several months, remove all contents and unplug the
power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open
slightly, blocking it open if necessary.
MOVING YOUR APPLIANCE
Unplug the unit from the wall outlet.
Remove all the contents.
Securely tape down all loose items inside your appliance.
Tape the doors shut.
ENERGY SAVING TIPS
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
Ensure that door is closed when the appliance is plugged in.
WARRANTY
Limited warranty, 1 year, parts and labor.
19
