ID
:
025719
Revision: 1-00
3
© Avantes BV
The following interface cables are available to connect any Avantes AvaSpec-USB2/EVO platform to
FOS-2-INL for the FOS-2-INL:
IC-DB26-FOS-SHUTTER-0.6
Length = 0.6m
IC-DB26-FOS-SHUTTER-2
Length = 2.0m
Pin description of an interface cable connector
Pin Description
1
Channel 2: Shutter Open/Close (High = Open, Low = Close)
2
GND
3
Channel 1: Shutter Open/Close (High = Open, Low = Close)
4
GND
Pin 1 is connected to DO5 of the DB26 connector.
Pin 3 is connected to DO8 of the DB26 connector.
2.3
Parts included
Fiber-optic Switch FOS-2-INL
2.4
Parts not included
1.
Interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2)
2.
Power supply PS-12V/2.08A
These parts can be ordered separately at Avantes.
2.5
Starting up
1.
Plug in the PS-12V/2.08A power supply .
2.
Plug in the connector of the power supply into the socket of the FOS-2-INL.
3.
Connect the SMA-connectors of your fibers to the Fiber inputs Channel 1 and 2
4.
For automatic TTL-shutter control connect interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-
DB26-FOS-SHUTTER-2) plug in connector and connect to AvaSpec spectrometer
5.
Connect the connector of the IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2) into
the unit and lock the connector with the screw terminal.
6.
For Correct for long time drift with FOS-2-INL see application note AvaSoft 8.
