- 9 -
User Manual
NOTE: In models UDD1 & UDD1S, the CO
2
tank (up to 5 lbs . in size) can be placed inside
the cooler to maintain complete mobility
CAUTION
CO
2
tanks are potentially dangerous because of the pressure
they contain . If you are unfamiliar with their use or the use of
a CO
2
regulator, seek information from your local distributor,
or beverage man before proceeding .
Knockout CO
2
Installation
These is the recommended procedure for
installing a remote CO
2
container in your Avantco unit .
1 . Remove black knockout plug with pliers . (See images below for plug locations)
2 . Use drill with 1/2” bit to bore a whole straight back through wall into compressor compartment .
3 . Snake CO
2
line through hole, down and around, exiting behind rear caster underneath grill .
4 . Seal hole around CO
2
line with silicone sealer to prevent cold air leakage .
*Depending on setup and amount of kegs, a CO
2
manifold may be needed .
Tools:
- Pliers
- Power Drill
- Silicone Sealer
- 1/2” Drill Bit