User Manual
www.AvantcoEquipment.com 3
Installation
Carefully unpack the coffee brewer and inspect for
damage and missing parts.
1. Position the brewer on a sturdy, level surface. Allow enough room above it for safe and easy filling of the water reservoir.
2. Place an empty glass decanter under the funnel.
3. Fill the water reservoir with the appropriate amount of water. Wait 2 minutes for any air trapped in the machine to be
released before proceeding to step 4.
4. Turn the power switch to “ON”. The Readiness Indicator should light.
5. After 4-5 minutes, the Readiness Indicator should turn off, indicating that the brewing process has ended.
6. Repeat steps 2 through 5 twice to clean the machine’s internal parts before brewing coffee for the first time.
NOTE: It is normal to hear some brewing and pumping sounds and to see water vapor coming out of
the machine during this procedure.
In case of overflow, turn the power switch
“OFF” immediately to stop the process.
Operation
1. Remove the funnel, and insert a paper coffee filter. Add the appropriate amount of coffee grounds.
Return the funnel to its correct position.
2. Make sure the empty decanter is positioned correctly under the funnel.
3. Fill the water reservoir, and turn the brewer “ON”.
a. Note: Do not add more than 1 decanter (64 oz.) of water to C30 to prevent overflow.
b. The Readiness Indicator should light up and brewed coffee will start flowing into the decanter. When the
Readiness Indicator light turns off, the brewing cycle is complete.
CAUTION: To prevent spills or burns, wait until coffee has stopped dripping from the funnel before removing it.
4. Dispose of the used coffee grounds and coffee filter and rinse the funnel with clean water. The unit is now ready to
brew another batch.
CAUTION: Do not leave empty decanters on the hot plates as this can damage the unit as well
as the decanters.
NOTE: After the first use, a small amount of water will always remain in the machine. If it will not be
used for an extended period, you should always pour out the remaining water and clean the machine
to prepare it for storage or transport.
!
