background image

- 4 -

User Manual

Safety / Warning

Please pay close attention to the safety notices in this section. Disregarding these notices may lead 
to serious injury and/or damage to the unit.

Attention

•  To minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for 

your unit.

•  Do not use extension cords.
•  Do not put your hands under the unit while it is being moved.
•  When the unit is not in use for a long period of time, please unplug the unit from the outlet.
•  After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could 

cause damage to the compressor.

Unplug Cord

• To minimize shock and fire hazards, please do not plug or unplug the cord with wet hands.
• During maintenance and cleaning, please unplug the unit.

Proper Grounding Required

•  To minimize shock and fire hazards, make sure that the unit is properly grounded.

Warning

•  Do not attempt to remove or repair any component unless instructed by factory.
•  Make sure that the unit is not resting on or against the electrical cord and plug.
•  To minimize personal injury, do not hang on the door.
•  Do not store any flammable and explosive gas or liquids inside the unit.
•  Do not attempt to alter or tamper with the electrical cord.

www.AvantcoRefrigeration.com

Summary of Contents for 178HF5







Reviews: